News

Home page

全部分类

Precautions for Installation of Rubber and Plastic Thermal Insulation Material

Release time：2020-02-08

Precautions for Installation of Rubber and Plastic Thermal Insulation Material

Because the rubber and plastic thermal insulation material has a series of characteristics such as good fire resistance, long service life, convenient installation and soft material, it has been widely used in the field of heat preservation and cold preservation.

Therefore, it is necessary for us to discuss the precautions for the installation of rubber and plastic insulation materials, so as to achieve a multiplier effect in the construction process.

After many years of on-site installation experience and some national technical standards, the installation of rubber and plastic insulation materials should be summarized as follows:

1. All cutting gaps and joints shall be bonded and sealed with special rubber glue.

2. After installation, all tees, elbows, valves, flanges and other accessories must reach the design thickness.

3. Do not use too much force when bonding glue, and the interface between all materials should be bonded under slight extrusion.

4. When installing, the large pipe should be followed by the small pipe, the elbow, the tee, the straight pipe, and the valve and the flange.

5. When installing frozen water pipes and refrigeration equipment, the gaps between the two ends of the rubber and plastic pipes and the iron pipes need to be coated with glue and bonded, and the bonding width should not be equal to the thickness of the rubber and plastic materials.

6. The cutting gap of the pipeline should be installed in an inconspicuous place as far as possible, and the cutting gap of the two pipes should be staggered with each other.

7. Do not install the machine in use. Do not turn on the machine within 36 hours after installation.

8. Rubber and plastic pipes with large pipe diameter have become oval due to packaging. Please cut the flatter side when cutting open.

Hubei Ovis Energy Saving Technology Company is a professional rubber and plastic board, rubber and plastic insulation board, rubber and plastic insulation board, color rubber and plastic board, rubber and plastic insulation pipe, rubber and plastic pipe and other rubber and plastic insulation manufacturers, rubber and plastic pipe and rubber and plastic board advanced technology, factory direct sales, reliable quality, reasonable price, welcome to inquire!

Rubber and plastic plates can be made into liners to play a wear-resistant role

Rubber insulation pipe has the advantage of making it widely used

Rubber and plastic plates can be made into liners to play a wear-resistant role

Rubber insulation pipe has the advantage of making it widely used

Hubei Aowei Si Energy‑Saving Technology Co., Ltd. successfully concluded its 8th Mid‑Autumn Customer Appreciation Gala. The event brought together industry peers and partners, who gathered to strengthen collaborative ties, discuss emerging opportunities, and explore new directions for the energy‑saving and thermal‑insulation sector. Eight years of partnership—working hand in hand toward a shared future. Throughout this journey, Aowei Si’s growth has been made possible by the trust and support of every customer and partner. As we stand at a new starting point, Hubei Aowei Si Energy‑Saving Technology will remain committed to its original professional mission, continuing to advance innovations in energy‑saving technologies. With reliable products and attentive service, we look forward to advancing together with our partners, pooling our strengths for mutual success, and co‑creating a greener, more sustainable future!