News

Home page

全部分类

Analysis of the installation points and advantages of rubber and plastic insulation materials

Release time：2020-04-06

Analysis of the installation points and advantages of rubber and plastic insulation materials

With the completion of various buildings, all kinds of materials to improve the quality of the building is also more and more, which is used for the insulation of the building insulation material is each building in the cover, must be laid, the market the most widely used insulation material should be rubber insulation material.

So in daily life, the installation of rubber insulation materials should pay attention to which points?

1. All cutting gaps and joints shall be bonded and sealed with special glue of Toyo brand.

2. After installation, all tees, elbows, valves, flanges and other accessories must reach the design thickness.

3. Do not use too much force when bonding glue, and the interface between all materials should be bonded under slight extrusion.

4. When installing, the large pipe should be followed by the small pipe, the elbow, the tee, the straight pipe, and the valve and the flange.

5. When installing frozen water pipes and refrigeration equipment, the gaps between the two ends of the rubber and plastic pipes and the iron pipes need to be coated with glue and bonded, and the bonding width should not be equal to the thickness of the rubber and plastic materials.

6. The cutting gap of the pipeline should be installed in an inconspicuous place as far as possible, and the cutting gap of the two pipes should be staggered with each other.

7. Do not install the machine in use. Do not turn on the machine within 36 hours after installation.

8. Rubber and plastic pipes with large pipe diameter have become oval due to packaging. Please cut the flatter side when cutting open.

First, green environmental protection, because this insulation material after laying, under the sun, will not produce harmful substances, very in line with national standards, so it will not produce any toxic gases that pollute the environment;

Second, the fireproof ability is strong, because this material is mostly made of the ignition material formulated by the state, so this insulation material has a very good effect in fire prevention;

Third, the building insulation, the use of insulation materials is very small, but also very thin, both save space, but also save costs, in addition, the use of rubber and plastic thickness than other insulation materials to reduce a lot.

It is the above advantages, rubber insulation materials will be loved by many builders.

The production of rubber insulation pipe specifications

Construction Method of Rubber Insulation Board

The production of rubber insulation pipe specifications

Construction Method of Rubber Insulation Board

Hubei Aowei Si Energy‑Saving Technology Co., Ltd. successfully concluded its 8th Mid‑Autumn Customer Appreciation Gala. The event brought together industry peers and partners, who gathered to strengthen collaborative ties, discuss emerging opportunities, and explore new directions for the energy‑saving and thermal‑insulation sector. Eight years of partnership—working hand in hand toward a shared future. Throughout this journey, Aowei Si’s growth has been made possible by the trust and support of every customer and partner. As we stand at a new starting point, Hubei Aowei Si Energy‑Saving Technology will remain committed to its original professional mission, continuing to advance innovations in energy‑saving technologies. With reliable products and attentive service, we look forward to advancing together with our partners, pooling our strengths for mutual success, and co‑creating a greener, more sustainable future!